332 Hog 4 Operations Manual
17.8.4 The Levels View Window
The Levels View window displays the output value of all intensities controlled by Hog 4 OS
from all cuelists, virtual cuelists, scenes, the Programmer and other editors, and parked
parameters. It provides an accurate indication of the status of shared intensity values when
multiple cuelists are running simultaneously.
To open the Levels View window:
Press and hold the Op en key, then select Le vels from the Main Toolbar.
The Levels View window by default displays raw intensity values; you can configure it via
buttons at the top of the window to display output information in the following ways:
Values: displays the raw parameter values.
Source: displays the source that currently has control of an intensity, for example, the
Programmer or a cuelist and cue number.
Plots: displays the name of the plot that has control of the parameter; if you want to
see the real world value being calculated by the plot for the parameter then choose
"value" instead of "plots"
Show Palettes: as with source, displays the palette that is supplying the intensity
value.
To Next Page
Loading...
