452 Hog 4 Operations Manual
10. Replace the word EDIT in the pasted text with the appropriate values as described
below:
The Compo und Type name value is the name of the compound fixture that
appears in the fixturer scheduler.
The type value for each compound fixture part must be the name of one of the
types described in the XML document.
To add more parts to the compound fixture simply copy and paste a part definition
and assign it to a part number.
11. Save the XML file once you are done editing. Please note that the XML file will fail XSD
schema validation due to a lack of a UUID but this will not impact your ability to import
the fixture type into a show.
12. Import the XML document into the fixture builder using the XML Import button.
13. Once the XML import is complete the compound fixture type and the individual fixture
types included in the compound fixture will be available in the fixture scheduler. Please
note that the compound fixture itself will not appear in the fixture builder. Editing the
compound fixture requires editing the XML file and importing it to the fixture builder
again.
To Next Page
Loading...
