Fuji Electric ALPHA5 Smart - PA2_80 to 85 Parameter in RAM 1 to 6; PA2_86 to 88 Positioning Data in RAM 1 to 3

CHAPTER 4 PARAMETER
4-90
Extended Function Setting Parameter
4
PA2_80 to 85 Parameter in RAM 1 to 6
No. Name Setting range
Default
value
Change
80 Parameter in RAM 1
81 Parameter in RAM 2
82 Parameter in RAM 3
83 Parameter in RAM 4
84 Parameter in RAM 5
85 Parameter in RAM 6
0: No setting
1 to 99: PA1_1 to 99
101 to 199: PA2_1 to 99
201 to 299: PA3_1 to 99
0 Power
If you change some parameters frequently, store them in RAM.
With this setting, you can change parameters infinitely.
Parameters that can be stored in RAM are those marked "Always" in the "Change" field.
The parameter stored in RAM is in the default value when the amplifier is turned on.
[Setting example] 1 to 99 = PA1_1 to 99, 101 to 199 = PA2_1 to 99, 201 to 299 = PA3_1 to 99
PA2_86 to 88 Positioning data in RAM 1 to 3
No. Name Setting range
Default
value
Change
86 Positioning data in RAM1
87 Positioning data in RAM2
88 Positioning data in RAM3
0: No setting
1 to 15: Positioning data No.
0 Power
If you change positioning data frequently, store them in RAM.
With this setting, you can change positioning data infinitely.
The positioning data stored in RAM is in the default value when the amplifier is turned on.