CHAPTER 14 PC LOADER
Detail Description of Function 14-27
14
14.6.5 Positioning Data Editing
Positioning data are registered to the servo amplifier.
Launch the screen by selecting [Menu] →[Edit Positioning Data].
The following functions can be used on this screen.
(1) Reload
Positioning data are read out from the connected servo amplifier.
(2) Send changes
Changed positioning data are sent to the connected servo amplifier.
(3) Send all
All positioning data are sent to the connected servo amplifier.
(4) Comparison
Currently edited positioning data are compared with those of the connected servo amplifier or
those having been saved in a file.
(5) Initialization
Currently edited positioning data or those of the connected servo amplifier* are reset to default
values.
(6) File information
Data about currently edited positioning data file. The type, date, comment and so on of the servo
amplifier and servomotor connected at the time of loading can be monitored.
Refer to the Loader help for explanation of other buttons.
(1) (3)
(4) (5)
(6)
(2x
To Next Page
Loading...