CHAPTER 14 PC LOADER
Function List 14-17
14
14.4 Function List
After the PC Loader is launched, the wizard Menu [General] shown below is displayed.
Real time trace
The speed, torque waveform and so on can be obtained easily with a single click.
Historical trace
Enter trigger settings to obtain waveforms in more details than those obtained with real time trace.
Monitor
Monitor [I/O check], [Various numerical data], [Alarm history], [Warning/Forecast monitor],
[Automatic vibration suppressing monitor], or [System configuration].
Edit Parameters
Parameters can be edited, transferred, compared or initialized.
Edit positioning data
Positioning data can be edited, transferred, compared or initialized.
Communication setup
Set up communication conditions for the servo amplifier and the PC.
Test running
Various test operations can be conducted independently between the servo amplifier and
servomotor.
Servo analyze
The resonance point and anti resonance point of the mechanical system are located.
For the description of buttons provided on each screen, refer to the Help of PC Loader.
To Next Page
Loading...