CHAPTER 6 KEYPAD
6-2
Display
6
(1)
(2)
6.1 Display
The servo amplifier is equipped with a keypad (see the figure on
the right).
The keypad is fixed.
The keypad is equipped with four-digit seven-segment LEDs (1),
four keys (2) (lift the front cover).
Numbers and letters are displayed on the four-digit
seven-segment LEDs.
Keys are [MODE/ESC], [], [], [SET/SHIFT] from the leftmost
one.
6.1.1 Mode
The keypad functions in seven modes.
Sequence mode: The control and operation statuses of the servo amplifier are displayed.
Monitor mode: Various servomotor states, I/O signals and so on are monitored.
Station number mode: The station number specified with a parameter is displayed.
Maintenance mode: Alarm at presents and alarm history are displayed.
Parameter edit mode: Parameters can be edited.
Positioning data edit mode: Positioning data can be edited.
Test operation mode: Servomotor operates through key operation at the keypad.
7-segment display 0 1 2 3 4 5 6 7 8 9 -
A b C d E F G H i J L
n o P q r S t U v y
To Next Page
Loading...