CHAPTER 6 KEYPAD
6-26
Monitor Mode
6
(26) Settling time (displayed digits: unsigned five digits)
The settling time under position control is displayed.
The displaying range is from 0 to 1000.0 ms. If the settling
time exceeds 1000.0 ms, "1000.0 is displayed.
(27) Resonance frequency 1 (displayed digits: unsigned four digits)
The resonance frequency recognized by the servo
amplifier is displayed.
The displaying range is from 50 to 2000 Hz. If no
resonance is detected, "4000" is displayed.
(28) Resonance frequency 2 (displayed digits: unsigned four digits)
The resonance frequency recognized by the servo
amplifier is displayed.
The displaying range is from 50 to 2000 Hz. If no
resonance is detected, "4000" is displayed.
on26
SET
(1 sec. or over)
1
----
000
To Next Page
Loading...