CHAPTER 8 SPECIFICATIONS
Specifications of Servomotor 8-9
8
Torque characteristics diagram (at 3-phase 200 V or single-phase 230 V amplifier source
voltage)
GYC101D5-□□2 (0.1 kW) GYC201D5-□□2 (0.2 kW)
GYC401D5-□□2 (0.4 kW) GYC751D5-□□2 (0.75 kW)
GYC102D5-□□2 (1.0 kW) GYC152D5-□□2 (1.5 kW)
GYC202D5-□□2 (2.0 kW)
These characteristics indicate typical values of each
servomotor combined with the corresponding servo
amplifier. The rated torque indicates the value
obtained when the servo amplifier is installed to the
following aluminum heat sink.
Model GYC101D, 201D, 401D : 250 × 250 × 6 mm
Model GYC751 : 300 × 300 × 6 mm
Model GYC102D : 300 × 300 × 12 mm
Model GYC152D, 202D : 400 × 400 × 12 mm
To Next Page
Loading...