5.2 Setting Basic Settings of Measurement
157
5
Chapter 5 ANALYZER Function (IM3533-01)
You can check the sweep point setting values in the sweep parameter setting section of the Measurement
screen as well as the [LIST] area of the Settings screen.
How to Check the Set Sweep Points
6
Sweep Range Setting
Select the setting method for sweep points.
The sweep points are calculated linearly
from the setting values of ,
, and .
The sweep points are calculated logarithmi-
cally from the setting values of ,
, and .
Reverts the number of sweep points to its
original value and closes the Settings
screen.
7
Press to confirm the setting.
ANALYZER Measurement Screen
Sweep Point List Display
Sweep parameter setting values
To Next Page
Loading...
