8.3 Compensating Values to Match Reference Values (Load Compensation)
238
Setting the Compensation Range
If the compensation frequency is not set, the compensation range cannot be set.
2. Select the range for compensation.
The range that can be set varies depending on the com-
pensation frequency.
Compensation Range Setting
To enable LOW Z: Press of LOW Z.
Load Compensation Setting
1. Press .
3. Press to close the setting screen.
Frequency
Ranges
that can
be set
Range Settings screen
DC
Entire
range
0.001 Hz to
10.000 kHz
10.001 kHz to
100.00 kHz
100 m to
10 M
100.01 kHz to
200.00 kHz
100 m to
1 M
To Next Page
Loading...
