HP 830 Series User Manual

232
Figure 213 Adding GigabitEthernet 1/0/1 to VLAN 100
3. Create VLAN-interface 100:
a. Select Network > VLAN Interface from the navigation tree.
b. Click the Create tab.
c. Enter 100 for VLAN ID.
d. Select the Configure Primary IPv4 Address box.
e. Select the Manual option.
f. Enter 192.168.1.2 for IPv4 Address.
g. Type 24 or 255.255.255.0 for Mask Length.
h. Click Apply.

HP 830 Series Specifications

General

Brand	HP
Model	830 Series
Category	Switch
Language	English