Huawei Quidway S3900 Series - Page 648

Operation Manual – ACL
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 ACL Configuration
Huawei Technologies Proprietary
1-9
Keyword DSCP value in decimal DSCP value in binary
af42 36 100100
af43 38 100110
cs1 8 001000
cs2 16 010000
cs3 24 011000
cs4 32 100000
cs5 40 101000
cs6 48 110000
cs7 56 111000
be (default) 0 000000
If the protocol type is TCP or UDP, you can also define the following information:
Table 1-6 TCP/UDP-specific rule information
Parameter Type Function Description
source-port
operator port1
[ port2 ]
Source
port(s)
Defines the
source port
information of
UDP/TCP
packets
destination-port
operator port1
[ port2 ]
Destination
port(s)
Defines the
destination port
information of
UDP/TCP
packets
The value of operator can
be lt (less than), gt (greater
than), eq (equal to), neq
(not equal to) or range
(within the range of) Only
the “range” operator
requires two port numbers
as the operands, and other
operators require only one
port number as the operand
port1 and port2: TCP/UDP
port number(s), expressed
with name(s) or numerals;
when expressed with
numerals, the value range
is 0 to 65,535
established
“TCP
connection
established”
flag
Specifies that
the rule will
match TCP
connection
packets with the
ack or rst flag
TCP-specific argument
If the protocol type is ICMP, you can also define the following information: