Huawei Quidway S3900 Series - Page 649

Operation Manual – ACL
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 ACL Configuration
Huawei Technologies Proprietary
1-10
Table 1-7 ICMP-specific rule information
Parameter Type Function Description
icmp-type
icmp-type
icmp-code
Type and
message
code
information
of ICMP
packets
Specifies the
type and
message code
information of
ICMP packets in
the rule
icmp-type: ICMP message
type, ranging 0 to 255
icmp-code: ICMP message
code, ranging 0 to 255
If the protocol type is ICMP, you can also directly input the ICMP message name after
the icmp-type argument. The following table describes some common ICMP
messages.
Table 1-8 ICMP messages
Name ICMP TYPE ICMP CODE
echo Type=8 Code=0
echo-reply Type=0 Code=0
fragmentneed-DFset Type=3 Code=4
host-redirect Type=5 Code=1
host-tos-redirect Type=5 Code=3
host-unreachable Type=3 Code=1
information-reply Type=16 Code=0
information-request Type=15 Code=0
net-redirect Type=5 Code=0
net-tos-redirect Type=5 Code=2
net-unreachable Type=3 Code=0
parameter-problem Type=12 Code=0
port-unreachable Type=3 Code=3
protocol-unreachable Type=3 Code=2
reassembly-timeout Type=11 Code=1
source-quench Type=4 Code=0
source-route-failed Type=3 Code=5
timestamp-reply Type=14 Code=0
timestamp-request Type=13 Code=0
ttl-exceeded Type=11 Code=0