Huawei Quidway S5600 Series - Page 146

Operation Manual – Voice VLAN
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 1
Voice VLAN Configuration
Huawei Technologies Proprietary
1-6
Operation Command Description
Enter port view
interface interface-type
interface-number
Required
Enable the voice VLAN
function for the port
voice vlan enable
Required
By default, the
voice VLAN
function is disabled
on a port.
Set voice VLAN operation
mode to manual mode
undo voice vlan mode auto
Required
The default voice
VLAN operation
mode is automatic
mode.
Quit to system view
quit
—
Enter
VLAN
view
vlan vlan-id
Access
port
Add the
port to the
VLAN
port interface-list
Enter port
view
interface interface-type
interface-num
Add the
port to the
voice
VLAN
port trunk permit vlan
vlan-id
port hybrid vlan vlan-id
{ tagged | untagged }
Required
Add a
port in
manua
l mode
to the
voice
VLAN
Trunk
or
Hybrid
port
Configure
the voice
VLAN to
be the
default
VLAN of
the port
port trunk pvid vlan vlan-id
port hybrid pvid vlan
vlan-id
Optional
Refer to
Table 1-2
to determine
whether or not this
operation is
needed.
Quit to system view
quit
—
Set an OUI address to be one
that can be identified by the
voice VLAN
voice vlan mac-address oui
mask oui-mask
[ description text ]
Optional
If you do not set the
address, the
default OUI
address is used.
Enable the voice VLAN
security mode
voice vlan security enable
Optional
By default, the
voice VLAN
security mode is
enabled.