Huawei Quidway S5600 Series User Manual

Operation Manual – Routing Protocol
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 5 BGP Configuration
Huawei Technologies Proprietary
5-24
Caution:
z Only the routes that pass the specified filter are advertised.
z A peer group member uses the same outbound route filtering policy as that of the
peer group it belongs to. That is, a peer group adopts the same outbound route
filtering policy.
5.4.7 Configuring BGP Route Receiving Policy
Table 5-10 Configure BGP route receiving policy
Operation Command Description
Enter system view
system-view
—
Enable BGP, and enter
BGP view
bgp as-number
Required
By default, BGP is
disabled.
Filter the received global
routing information
filter-policy { acl-number
| gateway ip-prefix-name
| ip-prefix
ip-prefix-name } import
Required
By default, the received
routing information is not
filtered.
Specify a route filtering
policy for routes coming
from a peer/peer group
peer { group-name |
ip-address } route-policy
policy-name import
Required
By default, no route filtering
policy is specified for a
peer/peer group.
Specify an
ACL-base
d BGP
route
filtering
policy for a
peer/peer
group
peer { group-name |
ip-address } filter-policy
acl-number import
Filter the
routing
informatio
n received
from a
peer/peer
group
Specify an
AS path
ACL-base
d BGP
route
filtering
policy for a
peer/peer
group
peer { group-name |
ip-address } as-path-acl
acl-number import
Required
By default, no ACL-based
BGP route filtering policy,
AS path ACL-based BGP
route filtering policy, or IP
prefix list-based BGP route
filtering policy is configured
for a peer/peer group.

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English