Huawei Quidway S5600 Series User Manual

Operation Manual – Routing Protocol
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 5 BGP Configuration
Huawei Technologies Proprietary
5-33
Operation Command Description
Create an EBGP
peer group
group group-name
external
Configure the AS
number of a peer
group
peer group-name
as-number
as-number
Create
an
EBGP
peer
group
Add a peer to a
peer group
peer ip-address
group group-name
[ as-number
as-number ]
Optional
You can add multiple peers
to the group. The system
automatically creates the
peer in BGP view and
specifies its AS number as
the one of the peer group.
Create an EBGP
peer group
group group-name
external
Create
a hybrid
EBGP
peer
group
Add a peer to a
peer group
peer ip-address
group group-name
[ as-number
as-number ]
Optional
You can add multiple peers
to the peer group.
Finish the session with the
specified peer/peer group
peer { group-name |
ip-address }
shutdown
Optional
Caution:
z It is not required to specify an AS number for creating an IBGP peer group.
z If there already exists a peer in a peer group, you can neither change the AS
number of the peer group, nor delete a specified AS number through the undo
command.
z In a hybrid EBGP peer group, you need to specify the AS number for all peers
respectively.
5.7.3 Configuring BGP Community
Table 5-16 Configure BGP community
Operation Command Description
Enter system view
system-view
—
Enable BGP, and enter BGP
view
bgp as-number
Required
By default, the system
does not operate BGP.

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English