Huawei Quidway S5600 Series - Page 395

Operation Manual – Routing Protocol
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 6 IP Routing Policy Configuration
Huawei Technologies Proprietary
6-5
Operation Command Description
Define a rule to
match community
attributes of BGP
routing information
if-match community
{ basic-community-number
[ whole-match ] |
adv-community-number }
Optional
Define a rule to
match the IP address
of routing information
if-match { acl acl-number | ip-prefix
ip-prefix-name }
Optional
By default, no
matching is
performed on the
address of routing
information.
Define a rule to
match the routing
cost of routing
information
if-match cost value
Optional
By default, no
matching is
performed on the
routing cost of
routing
information.
Define a rule to
match the next-hop
interface of routing
information
if-match interface interface-type
interface-number
Optional
By default, no
matching is
performed on the
next-hop interface
of routing
information.
Define a rule to
match the next-hop
address of routing
information
if-match ip next-hop { acl
acl-number | ip-prefix
ip-prefix-name }
Optional
By default, no
matching is
performed on the
next-hop address
of routing
information.
Define a rule to
match the tag field of
OSPF routing
information
if-match tag value
Optional
By default, no
matching is
performed on the
tag field of OSPF
routing
information.
Add specified AS
number for as-path in
BGP routing
information
apply as-path as-number-1
[ as-number-2 [ as-number-3 ... ] ]
Optional
Configure community
attributes for BGP
routing information
apply community { none | [ aa:nn ]
[ no-export-subconfed | no-export |
no-advertise ]* [ additive ] }
Optional