Huawei Quidway S5600 Series User Manual

Operation Manual – Multicast Protocol
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 7 PIM Configuration
Huawei Technologies Proprietary
7-15
Operation Command Description
Configure candidate
BSRs
c-bsr interface-type
interface-number
hash-mask-len [ priority ]
Optional
By default, candidate
BSRs are not set for the
switch and the value of
priority is 0.
Configure candidate RPs
c-rp interface-type
interface-number
[ group-policy
acl-number | priority
priority ]*
Optional
z You can configure to
filter the IP addresses
of some multicast
groups in ACL.
z By default, candidate
RPs are not set for the
switch and the value of
priority is 0.
Configure static RPs
static-rp rp-address
[ acl-number ]
Optional
z You can configure to
filter the IP addresses
of some multicast
groups in ACL.
z By default, static RPs
are not set for the
switch.
Limit the range of valid
BSRs
bsr-policy acl-number
Optional
z You can configure to
filter the IP addresses
of some multicast
groups in ACL.
z By default, the range of
valid BSRs is not set
for the switch.
Limit the range of valid
C-RPs
crp-policy acl-number
Optional
z You can configure to
filter the IP addresses
of some multicast
groups in ACL.
z By default, the range of
valid C-RPs is not set
for the switch.

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English