Operation Manual – Multicast Protocol
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 7 PIM Configuration
Huawei Technologies Proprietary
7-14
Caution:
z If you configure basic ACLs, the source address match is performed on all the
received multicast packets. The packets failing to match are discarded.
z If you configure advanced ACLs, the source address and group address match is
performed on all the received multicast packets. The packets failing to match are
discarded.
7.4 PIM-SM Configuration
PIM-SM configuration includes:
Table 7-7 Configuration tasks
Operation Description Section
Configure filtering policies
for multicast
sources/groups
Optional
Section
7.4.1 Configuring Filtering
Policies for Multicast Source/Group
Configure BSR/RP
Optional Section 7.4.2 Configuring BSR/RP
Configure PIM-SM
domain boundary
Optional
Section 7.4.3 Configuring PIM-SM
Domain Boundary
Filter the registration
packets from RP to DR
Optional
Section 7.4.4 Filtering the
Registration Packets from RP to DR
7.4.1 Configuring Filtering Policies for Multicast Source/Group
For the configuration of filtering policies for multicast source/group, refer to 7.3
PIM-DM Configuration.
7.4.2 Configuring BSR/RP
Table 7-8 Configure BSR/RP
Operation Command Description
Enter system view system-view —
Enable the multicast
routing protocol
multicast
routing-enable
Required
Enter PIM view
pim —
To Next Page
Loading...
