Huawei Quidway S5600 Series User Manual

Operation Manual – Multicast Protocol
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 8 MSDP Configuration
Huawei Technologies Proprietary
8-9
Table 8-2 Configuration tasks
Operation Description Related section
Configure description
information for MSDP
peers
Required
Section
8.3.2 Configuring Description
Information for MSDP Peers
Configure Anycast RP
application
Optional
Section 8.3.3 Configuring Anycast RP
Application
Configure an MSDP mesh
group
Optional
Section 8.3.4 Configuring an MSDP
Mesh Group
Configure MSDP peer
connection control
Optional
Section 8.3.5 Configuring MSDP Peer
Connection Control
8.3.2 Configuring Description Information for MSDP Peers
You can configure description information for each MSDP peer to manage and
memorize the MSDP peers.
Table 8-3 Configure description information for an MSDP peer
Operation Command Description
Enter system view
system-view
—
Enter MSDP view
msdp
—
Configure description
information for an MSDP
peer
peer peer-address
description text
Optional
The peer-address
argument is the address
of the peer. You can
configure addresses of
multiple peers for multiple
times.
By default, an MSDP peer
has no description text.
8.3.3 Configuring Anycast RP Application
If you configure the same interface (usually Loopback interface) addresses on two RPs
in the same PIM-SM domain, the two RPs will be MSDP peers to each other. To prevent
failure of RPF check on SA messages between MSDP peers, you must configure the
RP address to be carried in the SA messages.

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English