Huawei Quidway S5600 Series - Page 569

Operation Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S5600 Series Ethernet Switches-Release 1510
Chapter 1 AAA & RADIUS & HWTACACS
Configuration
Huawei Technologies Proprietary
1-39
Caution:
Generally, the access users are named in the userid@isp-name format. Where,
isp-name behind the @ character represents the ISP domain name. If the TACACS
server does not accept the user name carrying isp domain name, it is necessary to
remove the domain name from the user names before they are sent to the TACACS
server.
1.5.7 Configuring the Timers of TACACS Servers
Table 1-30 Configure the timers of TACACS servers
Operation Command Description
Enter system
view
system-view
—
Create a
HWTACACS
scheme and
enter its view
hwtacacs scheme
hwtacacs-scheme-name
Required
By default, no HWTACACS
scheme exists.
Set the
response
timeout time of
TACACS
servers
timer response-timeout
seconds
Optional
By default, the response timeout
time is five seconds.
Set the wait time
for the primary
server to restore
the active state
timer quiet minutes
Optional
By default, the primary server
waits five minutes before
restoring the active state.
Set the real-time
accounting
interval
timer realtime-accounting
minutes
Optional
By default, the real-time
accounting interval is 12 minutes.