Huawei Quidway S5600 Series - Page 570

Operation Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S5600 Series Ethernet Switches-Release 1510
Chapter 1 AAA & RADIUS & HWTACACS
Configuration
Huawei Technologies Proprietary
1-40
Caution:
z The setting of real-time accounting interval is indispensable to real-time accounting.
After an interval value is set, the device transmits the accounting information of
online users to the TACACS accounting server at intervals of this value. Even if the
server does not respond, the device does not cut down the online user.
z The interval must be a multiple of 3.
z The setting of real-time accounting interval somewhat depends on the performance
of the device and the TACACS server: A shorter interval requires higher device
performance.
1.6 Displaying and Maintaining AAA & RADIUS &
HWTACACS Information
After the above configurations, you can execute the display commands in any view to
view the operation of AAA, RADIUS and HWTACACS and verify your configuration.
You can use the reset command in user view to clear the corresponding statistics.
Table 1-31 Display AAA information
Operation Command Description
Display the configuration
information about one
specific or all ISP
domains
display domain [ isp-name ]
Display the information
about user connections
display connection
[ access-type { dot1x |
mac-authentication } |
domain isp-name | interface
interface-type
interface-number | ip
ip-address | mac
mac-address |
radius-scheme
radius-scheme-name |
hwtacacs-scheme
hwtacacs-scheme-name |
vlan vlan-id | ucibindex
ucib-index | user-name
user-name ]
You can execute the
display command in
any view