Huawei Quidway S5600 Series - Page 571

Operation Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S5600 Series Ethernet Switches-Release 1510
Chapter 1 AAA & RADIUS & HWTACACS
Configuration
Huawei Technologies Proprietary
1-41
Operation Command Description
Display the information
about local users
display local-user [ domain
isp-name | idle-cut { disable
| enable } | vlan vlan-id |
service-type { ftp |
lan-access | ssh | telnet |
terminal } | state { active |
block } | user-name
user-name ]
Table 1-32 Display and maintain RADIUS protocol information
Operation Command Description
Display the statistics
about local RADIUS
authentication server
display local-server
statistics
Display the configuration
information about one
specific or all RADIUS
schemes
display radius scheme
[ radius-scheme-name ]
Display the statistics
about RADIUS packets
display radius statistics
Display the buffered
no-response
stop-accounting request
packets
display
stop-accounting-buffer
{ radius-scheme
radius-scheme-name |
session-id session-id |
time-range start-time
stop-time | user-name
user-name }
You can execute the
display command in
any view
Delete the buffered
no-response
stop-accounting request
packets
reset
stop-accounting-buffer
{ radius-scheme
radius-scheme-name |
session-id session-id |
time-range start-time
stop-time | user-name
user-name }
Clear the statistics about
the RADIUS protocol
reset radius statistics
You can execute the
reset command in user
view