Huawei Quidway S5600 Series User Manual

Operation Manual – Login
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 3 Logging in through Telnet
Huawei Technologies Proprietary
3-2
Configuration Description
Set history command
buffer size
Optional
By default, the history command buffer
can contain up to 10 commands.
Set the timeout time of a
user interface
Optional
The default timeout time is 10
minutes.
3.1.2 Telnet Configurations for Different Authentication Modes
Table 3-3 lists Telnet configurations for different authentication modes.
Table 3-3 Telnet configurations for different authentication modes
Authentication
mode
Telnet configuration Description
None
Perform
common
configuration
Perform
common
Telnet
configuration
Optional
Refer to
Table 3-2.
Configure the
password
Configure the
password for
local
authentication
Required
Password
Perform
common
configuration
Perform
common
Telnet
configuration
Optional
Refer to
Table 3-2.
Specify to
perform local
authentication
or RADIUS
authentication
AAA
configuration
specifies
whether to
perform local
authentication
or RADIUS
authentication
Optional
Local authentication is
performed by default.
Refer to the
AAA&RADIUS&HWTACACS&
EAD module for more.
Scheme
Configure
user name
and password
Configure
user names
and
passwords for
local/RADIUS
users
Required
z The user name and
password of a local user are
configured on the switch.
z The user name and
password of a remote user
are configured on the
DADIUS server. Refer to
user manual of RADIUS
server for more.

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English