Huawei Quidway S5600 Series User Manual

Operation Manual - DHCP
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 2
DHCP Server Configuration
Huawei Technologies Proprietary
2-29
I. Configuring the option 184 supporting function in system view
Table 2-24 Configure the option 184 supporting function in system view
Operation Command Description
Enter system view
system-view
—
Configure the
interface to operate
in DHCP server
mode and assign the
IP addresses of a
specified
interface-based
address pool to
DHCP clients
dhcp select interface { all | interface
interface-type interface-number [ to
interface-type interface-number ] }
Required
Configure the
NCP-IP sub-option
dhcp server voice-config ncp-ip
ip-address { all | interface
interface-type interface-number [ to
interface-type interface-number ] }
Required
Configure the AS-IP
sub-option
dhcp server voice-config as-ip
ip-address { all | interface
interface-type interface-number [ to
interface-type interface-number ] }
Configure the voice
VLAN configuration
sub-option
dhcp server voice-config voice-vlan
vlan-id { enable | disable } { all |
interface interface-type
interface-number [ to interface-type
interface-number ] }
Configure the
Fail-over call routing
sub-option
dhcp server voice-config fail-over
ip-address dialer-string { all | interface
interface-type interface-number [ to
interface-type interface-number ] }
Optional

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English