Huawei Quidway S5600 Series User Manual

Operation Manual - QoS&QoS Profile
Quidway S5600 Series Ethernet Switches Chapter 2 QoS Profile Configuration
Huawei Technologies Proprietary
2-4
The user name is someone and its authentication password is hello. It is accessed on
GigabitEthernet1/0/1 of the switch and belongs to the test163.net domain. Its
corresponding QoS profile is “example” and the actions of the QoS profile is to limit the
bandwidth of the traffic matching with ACL rules to 128k and remark the DSCP
precedence to 46.
II. Network diagram
AAA Server
Switch
User
Network
AAA Server
Switch
User
NetworkNetwork
Figure 2-2 QoS configuration example
III. Configuration procedure
(1) Configuration on the AAA server
# Configure the user authentication information and the matching relationship between
the user name and the QoS profile, and more details are not given here.
(2) Configuration on the switch
# Enable 802.1x.
<Quidway> system-view
[Quidway] dot1x
[Quidway] dot1x interface GigabitEthernet 1/0/1
# Configure the IP address information for the RADIUS server.
[Quidway] radius scheme radius1
[Quidway-radius-radius1] primary authentication 10.11.1.1
[Quidway-radius-radius1] primary accounting 10.11.1.2
[Quidway-radius-radius1] secondary authentication 10.11.1.2
[Quidway-radius-radius1] secondary accounting 10.11.1.1
# Set the encryption passwords for the switch to exchange packets with the
authentication RADIUS servers and accounting RADIUS servers.
[Quidway-radius-radius1] key authentication name
[Quidway-radius-radius1] key accounting money
# Order the switch to delete the user domain name from the user name and then send
the user name to the RADIUS sever.

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English