Huawei Quidway S5600 Series User Manual

Operation Manual - QoS&QoS Profile
Quidway S5600 Series Ethernet Switches Chapter 2 QoS Profile Configuration
Huawei Technologies Proprietary
2-3
Operation Command Description
Add priority remark
actions
traffic-priority inbound
acl-rule { { dscp
dscp-value
|
ip-precedence { pre-value
|
from-cos } } | cos
{
pre-value | from-ipprec }
|
local-precedence
pre-value }*
Optional
Quit current view
quit
—
Enter Ethernet port
view
interface
interface-type
interface-number
—
Configure the
application mode of
QoS profile on the
current port to
port-based
qos-profile port-based
By default, the application
mode of QoS profile is
user-based.
z If MAC-address-based
authentication is
configured in 802.1x, the
application mode of QoS
profile must be
user-based.
z If port-based
authentication is
configured in 802.1x, the
application mode of QoS
profile must be
port-based.
Display the
configurations of QoS
profiles
display qos-profile
{ all |
name profile-name |
interface interface-type
interface-number
| user
user-name }
Optional
You can execute the
display
command in any view
acl-rule: Applied ACL rules which can be the combination of various ACL rules. The
way of combination is described in
Table 1-9.
 Note:
If a QoS profile has been applied on a port, the switch does not allow your deletion of
this QoS profile.
2.3.3 Configuration Example
I. Network requirements
The switch implements the QoS profile function for the access users.

Huawei Quidway S5600 Series Specifications

General

Brand	Huawei
Model	Quidway S5600 Series
Category	Switch
Language	English