Huawei Quidway S5600 Series - Page 964

Operation Manual – System Maintenance and Debugging
Quidway S5600 Series Ethernet Switches-Release 1510 Chapter 4
Device Management
Huawei Technologies Proprietary
4-6
Caution:
If the Flash memory of the switch is not sufficient, delete the original applications in it
before downloading the new ones.
# Initiate an FTP connection with the following command in user view. Input the correct
user name and password to log into the FTP server.
<Quidway> ftp 2.2.2.2
Trying ...
Press CTRL+K to abort
Connected.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(none):switch
331 Give me your password, please
Password:*****
230 Logged in successfully
[ftp]
# Enter the authorized path on the FTP server.
[ftp] cd switch
# Execute the get command to download the switch.bin and boot.btm files on the FTP
server to the Flash memory of the switch.
[ftp] get switch.bin
[ftp] get boot.btm
# Execute the quit command to terminate the FTP connection and return to user view.
[ftp] quit
<Quidway>
# Update the BootROM.
<Quidway> boot bootrom boot.btm
This will update BootRom file on unit 1. Continue? [Y/N] y
Upgrading BOOTROM, please wait...
Upgrade BOOTROM succeeded!
# Specify the downloaded application program as the host software to be adopted when
the switch starts next time. Then restart the switch to update the host software of the
switch.
<Quidway>boot boot-loader switch.bin
The specified file will be booted next time on unit 1!
<Quidway>display boot-loader
Unit 1: