Husqvarna TE511 - Page 75

E.17
H06372
1
H02444
2
H02445
5
H02448
3
4
1
st
edition (08-2010) _Rev. 11-2010
GENERAL PROCEDURES
- Working on the right side, loosen upper screw (1) using a 12 mm T-
wrench.
- Working on the left side, loosen screw (2) using a 12 mm T-wrench.
- Loosen clamp (4) screw (3) (with a 13 mm wrench), and move it onto the
exhaust manifold.
- Remove silencer (5).