16
MENU SCREEN
16-7
NOTE: The default settings shown below are for the USA version.
The default settings may differ, depending on your transceiver version.
■ Menu items and Default settings (Continued)
GPS
GPS Set
GPS Out (To DATA Jack)
In this item, set the GPS options.
OFF or ON
GPS Indicator
GPS Select
Manual Position
OFF or ON
OFF, Internal GPS, External GPS
or Manual
Power Save (Internal GPS) OFF, 1min, 2min, 4min, 8min or Auto
DESCRIPTIONS
RANGE OR VALUE (Default is shown in bold)
Selects the GPS receiver that the trans-
ceiver receives its position data from.
Selects the internal GPS receiver power
save function.
Manually enters your current position.
Turns the GPS indicator ON or OFF.
Turns the output of GPS information from
the internal GPS receiver to the [DATA]
jack ON or OFF.
GPS Logger
Record Interval
Record sentence
1sec, 5sec, 10sec, 30sec or 60sec
□✔RMC/□✔GGA/□✔GLL/□✔VTG
OFF or ON
GPS Memory
GPS Information
Displays the received GPS information.
GPS Position
Displays your position, RX station,
GPS
memory and Alarm positions.
Shows the GPS memory contents.
Turns the GPS logger function ON or OFF,
to store your route as you move.
Selects the GPS Logger function record
interval.
Selects the GPS Logger function record
sentences.
<<GPS Logger Only>>
Turns ON the GPS logger function with
the transceiver in the Sleep mode.
GPS Logger*
GPS Alarm
Alarm Area (RX/Memory)
Alarm Select
Limited, Extended or Both
OFF, RX, Group or Memory
Alarm Area (Group)
0’05”/0.08’~0’15”/0.25’~
59’59”/59.99’
Selects the target for the GPS alarm func-
tion.
Enters the GPS alarm active range.
Selects the GPS alarm active range.
* Be sure to insert the microSD card into the transceiver before selecting these items.
☞ Continued on the next page
To Next Page
Loading...
Need help?
General
