ICON A5 - Page 259

FLIGHT CONTROLS / ROLL CONTROLS 9-23
CHANGE C3 ICON A5 / MAINTENANCE MANUAL
CHAPTER 9
FIGURE 9-15
RIG PIN LOCATIONS—CONTROL STICK RIG PIN HOLE
9. Fold both aircraft wings and install 2X .1875 in diameter rig pins at both of the wing socket bell-
crank. See Figure 9-16.
FIGURE 9-16
RIG PIN LOCATIONS
LH SHOWN
RH OPPOSITE
Control Stick Rig Pin Hole
FWD
INSERT PIN FROM
SPAR POCKET SIDE
OF BELLCRANK
RH SHOWN
LH OPPOSITE