ICON A5 - Page 58

3-6 INSPECTIONS / MAINTENANCE SCHEDULES
ICON A5 / MAINTENANCE MANUAL CHANGE C2
CHAPTER 3
Interval (Calendar Years)
Inspection
Item
Maintenance
1 2 5 6 7.5 15 Initials
Per
Condition
Inspections
Condition
Inspection and
100-hr Inspection
(See “Condition
Inspections and
100-Hour
Inspections” on
page 3-9.)
X
1
or every
100-hrs
Avionics Transponder
Inspection/Test
per FAR 91.413
(See
“Transponder” on
page 13-8.)
X
Weight &
Balance
Statement
Perform a weight
and balance
procedure on the
aircraft and record
the results in the
aircraft’s on-board
POH (See “Empty
Weight and CG
Measurement” on
page 3-30.)
X
NOTE: A new weight and balance is required every two years. This measure is needed in order to
monitor possible water intrusion, absorption, and the collection of sand or other foreign matter in
the aircraft. Compare any weight and balance with the previous one and assess the reason for any
differences.
Engine Replace hoses
(See Rotax
Manual)
X
Brakes Replace brake
discs (See “Wheel
and Brake System
Maintenance” on
page 14-18.)
X