PROPULSION / ENGINE 16-29
CHANGE C2 ICON A5 / MAINTENANCE MANUAL
FIGURE 16-17
ENGINE MOUNT TO THE ENGINE CASE
5. Retain the associated washers and spacers and remove the engine mount from the engine.
VERIFICATION METHOD:
The procedure is complete when the steps have been finished.
RELATED INFORMATION:
"Engine Removal" on page 16-19
16.1.4.7 Engine Mount Installation
Use the following procedure to install the engine mount.
TASK INFORMATION:
Type of Maintenance
Heavy
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
To Next Page
Loading...
