PROPULSION / ENGINE 16-85
CHANGE C2 ICON A5 / MAINTENANCE MANUAL
FIGURE 16-49
LEFT VIEW OF FUSELAGE, FUSE BOX AND AFT BULKHEAD
3. Inspect the Regulator A and B wires near the connectors (Figure 16-50). Replace the Regulator
if any signs of discoloration (browning) are apparent. (See “Remove Fuse Box and Regulators”
on page 16-86.)
FIGURE 16-50
FUSE BOX, REGULATOR A AND REGULATOR B
VERIFICATION METHOD:
The task is completed when both regulator wires installed do not show signs of discoloration.
To Next Page
Loading...
