ICON A5 - Page 710

16-86 PROPULSION / ENGINE
ICON A5 / MAINTENANCE MANUAL CHANGE C2
CHAPTER 16
RELATED INFORMATION:
"Removal and Installation of Inspection Panels and Fairings" on page 3-34
"Remove Fuse Box and Regulators" on page 16-86
16.1.9.4 Maintenance Instructions
16.1.9.4.1 Remove Fuse Box and Regulators
Use the following procedure to remove the fuse box and the two regulators.
TASK INFORMATION:
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
13—Propulsion
Consumables
None
TASK INSTRUCTIONS:
1. Remove the AFT bulkhead baggage panel. (See “Removal and Installation of Inspection Panels
and Fairings” on page 3-34.)
2. Locate the fuse box forward of the AFT bulkhead, LH. See Figure 16-51.