ICON A5 - Page 727

PROPULSION / PROPELLER 16-103
CHANGE C2 ICON A5 / MAINTENANCE MANUAL
CHAPTER 16
RELATED INFORMATION:
"Propeller—Minor Blade or Hub Repair" on page 16-104
16.2.4.4 Propeller Installation Onto Engine
Instructions for installing the Sensenich propeller onto the Rotax engine.
TASK INFORMATION:
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
Calibrated Torque Wrench
Parts Required
None
Aircraft System and Number
13—Propulsion
Consumables
None
TASK INSTRUCTIONS:
1. Complete propeller assembly. (See “Propeller Assembly” on page 16-93.)
2. Install propeller per ‘PROPELLER INSTALLATON ON ENGINE’ task in the latest revision of
Sensenich Propellers document 3B0R5.
VERIFICATION METHOD:
Verify fastener torque and verify propeller tracking is within 3/16 inch.