ICON A5 - Page 726

16-102 PROPULSION / PROPELLER
ICON A5 / MAINTENANCE MANUAL CHANGE C2
CHAPTER 16
RELATED INFORMATION:
"Remove Spinner Dome" on page 16-105
"Install Spinner Dome" on page 16-106
"Remove Engine Cowlings" on page 16-13
"Install Engine Cowlings" on page 16-16
16.2.4.3 Propeller Removal From Engine
Instructions for removing the Sensenich propeller onto the Rotax engine.
TASK INFORMATION:
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
13—Propulsion
Consumables
None
TASK INSTRUCTIONS:
1. Remove propeller per ‘PROPELLER REMOVAL’ task in the latest revision of Sensenich Propel-
lers document 3B0R5.
VERIFICATION METHOD:
Visually verify propeller is not mounted to engine.