17-30 WING / WING LOCK
ICON A5 / MAINTENANCE MANUAL CHANGE C2
RELATED INFORMATION:
"Wing Lock Switch Mounting Plate Removal" on page 17-24
"Wing Lock Mounting Plate Component Replacement" on page 17-33
17.5.1.4 Wing Lock Handle Installation
Use the following procedure to install the wing lock handle.
TASK INFORMATION:
Type of Maintenance
Line
Level of Certification
LSA-RM
Task Specific Training Required
No
Special Tools Required
None
Parts Required
None
Aircraft System and Number
14—Wing
Consumables
LOCTITE
®
222™
MOLYKOTE™
1. Clean and inspect all parts and replace those that are not serviceable or if their condition is ques-
tionable. It is recommended that all retaining rings be replaced with new ones.
To Next Page
Loading...
