Keba ServoOne - 8 Motion Profile

8Motionprofile
Chapter overview
Pictogram
Navigation ►Projecttree►Devicesetup►Motionprofile
Brief description Thischapterdescribestheavailablemotionprofiles,aswell
astheirbasicandspecialsettings.
Contents
8.1 Settings 225
8.2 Scaling / Units 226
8.3 Basic settings 244
8.4 Stop ramps 251
8.5 Homing 252
8.6 Jog mode 267
8.7 Reference table 268
8.8 Analogue channel (ISA00 und ISA01) 273
8.9 State machine 276
8.10 Touch probe 278
8.11 Synchronized motion 279
8.12 Virtual Master 289
ID No.: 0842.26B.5-01Date: 09.2020
ServoOne- Device Help
224
8 Motion profile
Chapter overview
8.13 Common master 290
8.14 Cam group (CAM switch) 291
8.15 Data handling 300
8.16 Analogue channel (IEA05) 301