Keba ServoOne User Manual

Digital inputs can be:
l ISD0x
Digitalstandardinputsontheoutsideofthedevicewithafunctionalitythat
canbefreelyconfiguredtothegreatestextentpossible(“S”standardinputs)
l ENPO
Adigitalinput(EnablePower)ontheoutsideofthedevicethatisusedto
enable/lockthepowerstagewithhardwareandthathasafunctionalitythat
canbeconfigured,albeitwithverystrictlimitations
l ISDSH
Adigitalinput(SafeStop)ontheoutsideofthedevicethatisusedforan
enable/locksignalbythesafetystopcircuitandthathasafunctionalitythat
cannotbechanged
l ISV0x
“Virtualinputs”ontheinsideofthedevicewithafreelyconfigurable
functionalitymuchlikethatavailablefortheISD0xinputs
l IED0x
Inaddition,therecanbeadditionaldigitalinputsiftheX8optionisused(“E”
expansioninputs)
Status of the digital inputs
Clicking on the “Status of digital inputs” field on the input screen for the digital inputs
will open a visualization showing the digital inputs’ states (see Section "Status of the
digital inputs" on page 307).
9.2.1Digitalstandardinputs
There is a selector that can be used to assign a function to each digital standard
input. Certain functions will only be available for certain inputs or with specific
function packages. Depending on the configured function, the “Options...” button
may become enabled. If it is, this button can be used to switch to a different screen
directly and define the function’s exact behaviour there.
ID No.: 0842.26B.5-01Date: 09.2020
ServoOne- Device Help
304
9 Inputs/Outputs settings
l ThetouchprobefunctionisonlyavailableatISD05(P 106[0] - MPRO_
INPUT_FS_ISD05)andISD06(P 107[0] - MPRO_INPUT_FS_ISD06).
l Allinputscanbeswitchedfrom“active-high”to“active-low”(individualbitsin
P 120 - MPRO_INPUT_INV).
l Allinputscanbesmoothedwithafreelyconfigurablefiltertime(P 118 -
MPRO_INPUT_FILTER).
ID Index Name Unit Description
101 0 MPRO_INPUT_FS_ISD00  FunctionofdigitalinputISD00
102 0 MPRO_INPUT_FS_ISD01  FunctionofdigitalinputISD01
103 0 MPRO_INPUT_FS_ISD02  FunctionofdigitalinputISD02
104 0 MPRO_INPUT_FS_ISD03  FunctionofdigitalinputISD03
105 0 MPRO_INPUT_FS_ISD04  FunctionofdigitalinputISD04
106 0 MPRO_INPUT_FS_ISD05  FunctionofdigitalinputISD05
107 0 MPRO_INPUT_FS_ISD06  FunctionofdigitalinputISD06
108 0 MPRO_INPUT_FS_ISDSH  FunctionofdigitalinputISDSH
    
113  MPRO_INPUT_FS_IEDxx  Inputsextendeddigital:Functionofdigitalinputs
113 0 IED00  FunctionofdigitalinputIED00
113 1 IED01  FunctionofdigitalinputIED01
113 2 IED02  FunctionofdigitalinputIED02
113 3 IED03  FunctionofdigitalinputIED03
    
118  MPRO_INPUT_FILTER  Digitalinputs:Filtertime
118 0 MPRO_INPUT_FILTER ms forENPO
118 1 MPRO_INPUT_FILTER ms forISD00
118 2 MPRO_INPUT_FILTER ms forISD01
118 3 MPRO_INPUT_FILTER ms forISD02
118 4 MPRO_INPUT_FILTER ms forISD03
118 5 MPRO_INPUT_FILTER ms forISD04
118 6 MPRO_INPUT_FILTER ms forISD05
118 7 MPRO_INPUT_FILTER ms forISD06
118 8 MPRO_INPUT_FILTER ms forISA00
118 9 MPRO_INPUT_FILTER ms forISA01
118 10 MPRO_INPUT_FILTER ms forISDSH
118 11 MPRO_INPUT_FILTER ms forIED00
118 12 MPRO_INPUT_FILTER ms forIED01
118 13 MPRO_INPUT_FILTER ms forIED02
Table 9.1: “Digital standard inputs” parameters

Keba ServoOne Specifications

General

Brand	Keba
Model	ServoOne
Category	Controller
Language	English