Keba ServoOne - Error 24: Encoder Channel 3, Initialization Error

11.6.25Error24:Encoderchannel3,initializationerror
11.6.25.1Error24-1(emergencycode7307h)
Cause: Channel 3 Initialization: error, module identification failed
Suggested steps:
Please look up, if there's placed the right hardware module in the slot of X8
IdentificationoftheX8
module
l ThisisprobablyahardwareproblemoftheX8
module!
l PleasecheckifthecorrectX8moduleis
installed.
l Inanycaselookatinitoutputsinthemessage
windowoftheDriveManager.
l Iftheerroroccursagain(after24Vreset),
pleasecontactyourserviceprovider.
11.6.25.2Error24-2(emergencycode7307h)
Cause: Channel 3 Initialization: common error from encoder option module
Suggested steps:
Please look at Log entry window for error code information
Initializationencoder
channel3
l Errorduringtheinitializationroutinesof
encoderchannel3.
l Inanycaselookatinitoutputsinthemessage
windowoftheDriveManager.
l Themostcommoncauseoferroristhewiring
totheencoder.
ID No.: 0842.26B.5-01Date: 09.2020
ServoOne- Device Help
404
11 Alarms & warnings
11.6.25.3Error24-3(emergencycode7307h)
Cause: Channel 3 Initialization, SSI: error, encoder monitoring
Suggested steps:
Please connect the encoder correctly.
Initializationencoder
channel3
l Errorduringtheinitializationroutinesof
encoderchannel3.
l Inanycaselookatinitoutputsinthemessage
windowoftheDriveManager.
l Themostcommoncauseoferroristhewiring
totheencoder.
11.6.25.4Error24-4(emergencycode7307h)
Cause: Channel 3 Initialization, EndDat 2.1: error, no EnDat 2.1 encoder (May be,
it's an SSI encoder!?)
Suggested steps:
No further information available. Please contact your service provider.
Initializationencoder
channel3
l Errorduringtheinitializationroutinesof
encoderchannel3.
l Inanycaselookatinitoutputsinthemessage
windowoftheDriveManager.
l Themostcommoncauseoferroristhewiring
totheencoder.