Keba ServoOne - 11 Alarms & Warnings; Warning Status

11Alarms&warnings
Chapter overview
Pictogram
Navigation ►Projecttree►Devicesetup►Alarms&warnings
Brief description
This chapter describes the possible alarm and warning
events, thresholds for triggering and resetting, and error
reactions.
Contents
11.1 Warning status 328
11.2 Alarms and warnings (Details) 330
11.3 Warning thresholds 337
11.4 Error display 338
11.5 Error reactions 339
11.6 Error list 342
ID No.: 0842.26B.5-01Date: 09.2020
ServoOne- Device Help
328
11 Alarms & warnings
11.1Warningstatus
l Thestatusforthemostimportantwarningscanbecheckedwith...
l The“Warnings”pictogramonthequicklaunchtoolbarorvia
l ►Projecttree►Devicesetup►Alarms&warnings►Warningstatus.
A visual representation of the most important bits in status word P34[0] -
ERR_WRN_State will appear.
l Assoonasthereisawarning,thecorrespondingbitwillbesetinstatusword
P 34[0]andthevisualrepresentationwilldisplayitintheformofanLEDwith
asolidlight.Thebitscanalsobedisplayedandrecordedovertimeinthe
formofanoscilloscopesignal.
l Theindividualtriggerthresholdsforsettingandresettingawarningare
definedinP 730 - MON_WarningLevel(seeSection"Warningthresholds"on
page337).