Keba ServoOne - Error 23: Encoder Channel 2, Initialization Error

11.6.24Error23:Encoderchannel2,initializationerror
11.6.24.1Error23-1(emergencycode7304h)
Cause: Channel 2 Initialization, Resolver: error 'Lines' from parameter (560) ENC_
CH2_Lines
Suggested steps:
Please note the extended information of the error message
Initializationencoder
channel2
l Errorduringtheinitializationroutinesof
encoderchannel2.
l Inanycaselookatinitoutputsinthemessage
windowoftheDriveManager.
l Themostcommoncauseoferroristhewiring
totheencoder.
11.6.24.2Error23-2(emergencycode7304h)
Cause: Channel 2 Initialization, Resolver: timeout error, getting AB-SquareSum
Suggested steps:
No further information available. Please contact your service provider.
Initializationencoder
channel2
l Errorduringtheinitializationroutinesof
encoderchannel2.
l Inanycaselookatinitoutputsinthemessage
windowoftheDriveManager.
l Themostcommoncauseoferroristhewiring
totheencoder.
ID No.: 0842.26B.5-01Date: 09.2020
ServoOne- Device Help
403
11 Alarms & warnings
11.6.24.3Error23-3(emergencycode7304h)
Cause: Channel 2 Initialization, Resolver: error, encoder monitoring
Suggested steps:
Please connect the encoder correctly.
Initializationencoder
channel2
l Errorduringtheinitializationroutinesof
encoderchannel2.
l Inanycaselookatinitoutputsinthemessage
windowoftheDriveManager.
l Themostcommoncauseoferroristhewiring
totheencoder.
11.6.24.4Error23-4(emergencycode7306h)
Cause: Channel 2 Initialization, SinCos: error, hardware
Suggested steps:
Please note the extended information of the error message
Initializationencoder
channel2
l Errorduringtheinitializationroutinesof
encoderchannel2.
l Inanycaselookatinitoutputsinthemessage
windowoftheDriveManager.
l Themostcommoncauseoferroristhewiring
totheencoder.