Keba ServoOne - Encoder; Control

3.4Encoder
Image 3.6: “Initial commissioning - Encoder selection” screen
l Thereisadatabaseavailableforcommissioningtheencoder.Thisdatabase
canbeusedtoselectfromalargenumberofstandardmodels.
l Ifyouareunabletofindyourencodermodelorwanttoconfigureadditional
settings,clickonthe"Settings..."button.FordetailsseeSection"Encoder
selection"onpage53
ID No.: 0842.26B.5-01Date: 09.2020
ServoOne- Device Help
24
3 Initial commissioning
3.5Control
Image 3.7: “Initial Commissioning - Control” screen
l Youcanusethisscreentoselectthecontrolmodeforthedevice.
l Todeterminethesystem’sinertiaandconfigurepositionandspeedcontrol
settings,clickonthe"Basic settings"button.FordetailsseeSection"Basic
settings"onpage112.
l Toaccessthe“Control”screen,clickonthe"Advanced >>"button.For
detailsseeSection"Basicsettings"onpage112.