Keba ServoOne - EDS File Generator

12.6EDSfilegenerator
Image 12.1: EDS file generator screen
To be able to integrate a ServoOne or ServoOnejunior into a CANopen fieldbus
network, you will need an EDS file. This EDS file can
a. BegeneratedwiththehelpoftheEDSfilegeneratorforthecurrentfirmware
onthedevice
b. Bedownloadedfromourwebsite,www.keba.com.
NOTE
l TheCANopenfieldbussystemisoneoftheoptionsavailablefor
theServoOnejunior,ServoOneSingle-AxisSystemandMulti-Axis
Systemseries.Itisonlyavailableifinstalledatthefactory,and
cannotberetrofitted.
ID No.: 0842.26B.5-01Date: 09.2020
ServoOne- Device Help
458
12 Fieldbus