Keba ServoOne User Manual

13Technologyoptions(X8)
Chapter overview
Pictogram
Navigation ►Projecttree►Devicesetup►Technologyoptions(X8)
Brief description Thischapterprovidesinformationonthetechnologyoptions
availableforconnectorX8.
Contents
13.1 Selection of modules 459
13.2 Second SinCos encoder 460
13.3 SinCos encoder 460
13.4 TTL with encoder simulation 461
13.5 SSI encoder simulation 461
13.6 DIO option 462
13.7 MIO option 462
13.8 TwinSync 463
ID No.: 0842.26B.5-01Date: 09.2020
ServoOne- Device Help
459
13 Technology options (X8)
13.1Selectionofmodules
Image 13.1: “Technology options (X8) settings” screen
Option X8 (available only from the factory; cannot be retrofitted) supports the
following options:
l SinCosmodule(seeSection"Channel3:InterfaceX8(optional)"onpage78)
l TTLencoder/simulation(seeSection"TTLwithencodersimulation"onpage
461)
l TTLencoderwithcommutationsignals
l SSImodule(seeSection"SSIencodersimulation"onpage461)
l TWINsyncmodule(seeSection"TwinSync"onpage463)
For the encoder types that can be evaluated, see Section "Channel 3: Interface X8
(optional)" on page 78.

Keba ServoOne Specifications

General

Brand	Keba
Model	ServoOne
Category	Controller
Language	English