Keba ServoOne - Error 40: Tech Option Error

11.6.38Error40:Techoptionerror
11.6.38.1Error40-0(emergencycode7300h)
Cause: Tech-Option communication error
Suggested steps:
TWIN communication lost, check wiring or framing errors of TWIN option
Thisissueisprobably
causedbyanunsuitable
parametersetting.
l Saveyourparametersetforalaterrestore.
l See'historyofparameterchanges'andundo
thelatestchanges.
l Pleasecheckyourparametersetfor
implausiblesettings.
l Pleasesetdevicetofactorysetting,restart,and
seeiftheerroroccursagain.
l Whenreportingthiserrortoyourservice
partner,pleaseincludeyourdevice's
parametersetting.
ID No.: 0842.26B.5-01Date: 09.2020
ServoOne- Device Help
430
11 Alarms & warnings
11.6.38.2Error40-1(emergencycode7300h)
Cause: Tech-Option communication error
Suggested steps:
Tech-Option switching-frequency discrepancy
Thisissueisprobably
causedbyanunsuitable
parametersetting.
l Saveyourparametersetforalaterrestore.
l See'historyofparameterchanges'andundo
thelatestchanges.
l Pleasecheckyourparametersetfor
implausiblesettings.
l Pleasesetdevicetofactorysetting,restart,and
seeiftheerroroccursagain.
l Whenreportingthiserrortoyourservice
partner,pleaseincludeyourdevice's
parametersetting.