Keba ServoOne - Page 402

11.6.23.36Error22-44(emergencycode7305h)
Cause: Channel 1 Initialization, LinMot: common error
Suggested steps:
Please note the extended information of the error message
Initializationencoder
channel1
l Errorduringtheinitializationroutinesof
encoderchannel1.
l Inanycaselookatinitoutputsinthemessage
windowoftheDriveManager.
l Themostcommoncauseoferroristhewiring
totheencoder.
11.6.23.37Error22-45(emergencycode7305h)
Cause: Channel 1 Initialization: the internal multiturn resolution is too low to process
ENC_CH1_MTBase correctly.
Suggested steps:
Please reduce the internal position resolution to free bits for the internal multi-turn
information.
Initializationencoder
channel
l Thisisprobablyaproblemofthe
parameterization!
l Inanycaselookatinitoutputsinthemessage
windowoftheDriveManager.
ID No.: 0842.26B.5-01Date: 09.2020
ServoOne- Device Help
402
11 Alarms & warnings
11.6.23.38Error22-46(emergencycode7305h)
Cause: Channel 1 Initialization, BISS: common error
Suggested steps:
Please note the extended information of the error message
Initializationencoder
channel1
l Errorduringtheinitializationroutinesof
encoderchannel1.
l Inanycaselookatinitoutputsinthemessage
windowoftheDriveManager.
l Themostcommoncauseoferroristhewiring
totheencoder.
11.6.23.39Error22-47(emergencycode7305h)
Cause: Channel 1 Initialization, EndDat22: common error
Suggested steps:
Please note the extended information of the error message
Initializationencoder
channel1
l Errorduringtheinitializationroutinesof
encoderchannel1.
l Inanycaselookatinitoutputsinthemessage
windowoftheDriveManager.
l Themostcommoncauseoferroristhewiring
totheencoder.