EasyManua.ls Logo

Keba ServoOne - Page 394

Keba ServoOne
493 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11.6.23.4Error22-4(emergencycode7305h)
Cause: Channel 1 Initialization, EndDat 2.1: error, no EnDat 2.1 encoder (May be,
it's an SSI encoder!?)
Suggested steps:
No further information available. Please contact your service provider.
Initializationencoder
channel1
l Errorduringtheinitializationroutinesof
encoderchannel1.
l Inanycaselookatinitoutputsinthemessage
windowoftheDriveManager.
l Themostcommoncauseoferroristhewiring
totheencoder.
11.6.23.5Error22-5(emergencycode7305h)
Cause: Channel 1 Initialization, EndDat 2.1: error, 'Lines' read from encoder
Suggested steps:
Please note additional Information in the message window of the DriveManager.
Initializationencoder
channel1
l Errorduringtheinitializationroutinesof
encoderchannel1.
l Inanycaselookatinitoutputsinthemessage
windowoftheDriveManager.
l Themostcommoncauseoferroristhewiring
totheencoder.
ID No.: 0842.26B.5-01Date: 09.2020
ServoOne- Device Help
394
11 Alarms & warnings
11.6.23.6Error22-6(emergencycode7305h)
Cause: Channel 1 Initialization, EndDat 2.1: error, 'MultiTurn' read from encoder
Suggested steps:
Please note additional Information in the message window of the DriveManager.
Initializationencoder
channel1
l Errorduringtheinitializationroutinesof
encoderchannel1.
l Inanycaselookatinitoutputsinthemessage
windowoftheDriveManager.
l Themostcommoncauseoferroristhewiring
totheencoder.
11.6.23.7Error22-7(emergencycode7305h)
Cause: Channel 1 Initialization, EndDat 2.1: error, 'SingleTurn' read from encoder
Suggested steps:
Please note additional Information in the message window of the DriveManager.
Initializationencoder
channel1
l Errorduringtheinitializationroutinesof
encoderchannel1.
l Inanycaselookatinitoutputsinthemessage
windowoftheDriveManager.
l Themostcommoncauseoferroristhewiring
totheencoder.

Table of Contents

Related product manuals