Keysight U8480 Series - Page 228

8 SENSe Subsystem
228 U8480 Series Programming Guide
The frequency interval is rounded to the nearest kHz, with a minimum interval of 1
kHz. If the stop frequency exceeds the maximum frequency of the U8480 Series,
the remaining steps will be repeated with the last frequency point.
Syntax
Parameters
Example
Item Description/Default Range of values
numeric_value
Number of steps in the triggered frequency
sweep:
– DEF : the default value is 0
– MIN :0
– MAX :250
0 to 250
DEF
MIN
MAX
FREQ:STEP 10 Sets the frequency sweep with 10 steps.
:CW
SENS
1
FREQ
:
:FIX
:STEP
Space
numeric_value
DEF
MIN
MAX
MIN
MAX
Space
?